18672PDL

Manufacturer: Delfield Company

Manufacturer Item Number: 18672PDL

Click Here to Visit Our Website

Delfield Company Website

Print Spec Sheet

Description:

Upper and lower rails are mechanically cooled utilizing LiquiTec® technology with die stamped 12"x20" openings

Top is constructed of 18-gauge stainless steel

22-gauge stainless steel ends are standard

Pans and adapter bars by others

17" polyethylene cutting board is standard

Flush mount NSF-7 certified pans

High density environmentaly fiendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential polyurethane foam throughout the unit

Dart style quick change gaskets

Stainless steel removable hinged covers

On/off switch is located behind the louver

1.50" diameter hole in louver for easy access to rail on/off switch

One year parts and 90 day labor standard warranty

8' long electrical cord

Environmentally friendly HFC-404A refrigerant

CE approved versions available as an option

Additional Information:

Width x Depth x Height	72" x 311/2" x 5335/64" (182.88 cm x 80.01 cm x 136 cm)
Weight	873 lb (395.9928 kg)
Power Output	12.7 Amps
Exterior Top	Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has two mechanically cooled LiquiTec® refrigerated raised rails at the rear with openings to accommodate pans (provided by others). Rail interiors are 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rails. Temperature in top openings maintains 33ËšF (1ËšC) to 41ËšF (5ËšC) with pans flush mounted at 86ËšF (29.7ËšC) ambient room temperature, meeting NSF 7 requirements.
Exterior Back, Bottom and Ends	Unfinished galvanized steel back and bottom. Exterior ends are finished with 22-gauge stainless steel.
Base Interior	Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25" (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5.1cm) high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) foamed in place polyurethane. End of base has a machine compartment with condensing units installed.
Door(s)	22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner.
Refrigeration System	HFC-404A refrigerant. Cabinet has (1) blower coil assembly with expansion valve on 48" and 72" models. Refrigerated base maintains temperature of 36ËšF (2ËšC) to 40ËšF (4KC). On/off switches for rail and base are located behind the louvered panel. A 1.50" diameter hole is on the louver for easy access to rail on/off switch
Electrical Connections	115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8' (2.4m) cord and plug.