3M™ ½ Petroleum Sorbent Drum Cover 22 in
Will sorb hydrocarbon based liquids and repel aqueous based liquids. These covers are packaged 25 per case with a combined absorption capacity of 19 gallons and a weight of 8 pounds.
High capacity sorbents have a scrim on one side to increase strength and eliminate linting. This drum cover is designed to be used on a 55 gallon drum to catch drips and spills that occur during the dispensing of all types of hydrocarbon materials used in daily operations. With cut-outs for dispensing bungs and a skirt which fits neatly around the base of the drum to catch any drips that would normally end up on the floor, the 3M drum cover is the most versatile on the market.
Adobe® Acrobat® Reader is required to view PDF documents.
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations.
Sorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
|Add a Tag|